超低压喷涂随着喷涂浆料的大小而变化，喷涂雾化气压值在0.05MPA-0.09MPA之间，能完全满足皮革喷涂工艺的要求（注：普通喷枪喷涂雾化气压在0.3MPA-0.4MPA之间）超低气压喷涂直接减少了雾化后的浆料反弹，同时延长了喷枪的使用寿命。超低压喷涂与普通喷涂有着本质上的不同，超低压喷枪结构和精度更高，消除了喷涂时气压和浆料压力产生的波动脉冲，是皮革喷涂时浆料雾化更细腻，覆盖度更均匀。超低压喷涂更节省浆料，由于喷涂雾化气压值的超低压力，加以新款升级的结构优化设计，使吸风功率减小且变得更均匀，在节省浆料的同时，也大幅度的降低了喷室循坏谁的换水频率，让喷室内部和排风管道更干净。
Ultra-low pressure spraying changes with the size of the spraying slurry. The spraying atomization pressure value is between 0.05MPA-0.09MPA, which can fully meet the requirements of leather spraying process (Note: The spraying atomization pressure of ordinary spray gun is between 0.3MPA-0.4MPA). Ultra-low pressure spraying directly reduces the rebound of the slurry after atomization, and at the same time extends the service life of the spray gun.Ultra-low pressure spraying is fundamentally different from ordinary spraying. The structure and precision of the ultra-low pressure spray gun are higher, eliminating the fluctuating pulses generated by the air pressure and slurry pressure during spraying. The slurry is atomized more finely and the coverage is more uniform when spraying leather.Ultra-low pressure spraying is more economical in slurry, due to the ultra-low pressure value of spraying atomization air pressure, combined with the new upgraded structural optimization design, the suction power is reduced and becomes more uniform, while saving slurry, it also significantly reduces the frequency of water replacement in the spray chamber, making the internal spray chamber and the exhaust pipe cleaner.
